How to operate a circular saw

1. Charge the Battery: Before using a lithium battery circular saw, you must ensure that the battery is fully charged. Insert the battery into the charger and connect the charger to the power outlet. Wait for the battery to charge until the indicator light turns green.

2. Install the Battery: Once the battery is charged, slide it into the circular saw's battery slot until it snaps securely into place.

3. Attach the Blade: The next step is to attach the blade. Loosen the blade release knob and insert the blade, aligning the teeth with the saw’s directional arrows. Tighten the blade release knob to secure the blade in place.

4. Set the Depth: Using the depth adjustment knob, set the depth of the blade to match the thickness of the material you need to cut.

5. Adjust the Bevel Angle: If you need to make a bevel cut, adjust the bevel angle using the bevel adjustment knob. Set the angle you want to cut at and lock the knob back into place.

6. Turn on the Saw: Press the trigger to turn on the saw. Hold it down and allow the blade to reach full speed before beginning the cut.

7. Begin Cutting: Begin cutting and guide the saw along the cutting line. Use both hands to steady the saw and maintain control throughout the cut.

8. Turn off the Saw: Once the cut is complete, release the trigger to turn off the saw.

9. Remove the Battery: Remove the battery from the saw and store it in a safe place.

10. Clean up: Wipe off the saw dust and debris that accumulates on the saw after use. Store the saw in a secure place.