1. Before using the angle grinder, it is necessary to check its various accessories to see if there is any damage or aging. If it exists, it should not be used immediately. It must be repaired first to ensure sufficient safety.
2. During the construction process of cutting or grinding with an angle grinder, other unrelated personnel are not allowed to approach, and there must be no flammable and explosive items within the scope of the construction area. Moreover, the construction personnel are strictly prohibited from using the angle grinder in the direction of people.
3. When the grinding wheel is used up, it needs to be replaced with a new one. At this time, the construction should not be carried out directly, but the power supply should be cut off and the replacement work should be done to avoid unnecessary danger by pressing the wrong button during the replacement process.
4. If the construction is in a relatively dangerous area, if there are flammable materials around, then within the construction scope, several fire extinguishers should be prepared to prevent the occurrence of fire and minimize the loss as much as possible.
5. The use time of the angle grinder should not be too long. When it is used for about half an hour, it needs to be stopped for 10~20 minutes. After it cools down, the construction can be carried out again, so as to avoid the equipment appearing due to excessive temperature. damage and even work-related injuries.
