1, electric drill: used for metal materials, plastic and other drilling tools. When equipped with positive and negative switch and electronic speed regulating device, can be used for electric screw batch. Some models come with rechargeable batteries
2, electric hammer: used for masonry, concrete, artificial or natural stone drilling, and the function of the electric drill can be interchangeable. SDS-PLUS drill chuck and bit, medium are widely used in light drilling
3. Impact drill: It is mainly used for drilling hard materials such as masonry, concrete and so on. When the impact mechanism is closed, it can also be used as an ordinary electric drill. 4. Grinder: A tool used for grinding with a grinding wheel or a grinding disc, used for grinding wood. There are direct electric grinder and electric Angle grinder. 5, curve saw: mainly used for cutting steel, wood, plastic and other materials, saw blade up and down reciprocating motion or swing, the most suitable for cutting accurate straight line or curve. 6, Angle mill: also known as grinding machine or disk mill, mainly used for grinding steel, metal and stone, etc. Commonly used grinding straight 100mm, 125mm, 180mm, 230mm.
7, cutting machine: mainly used for cutting different angles of aluminum, wood, etc., divided into metal material cutting machine and non-metal material cutting machine, when using should pay attention to tightening saw blade, wear goggles.
8, electric wrench and electric screwdriver: Electric wrench and electric screwdriver are used for loading and unloading threaded connectors. The transmission mechanism of electric telegraph hand is composed of planetary gear and ball spiral groove impact mechanism. The electric screwdriver uses a toothed clutch drive mechanism or a gear drive mechanism.
9, concrete vibrator: used to pour concrete soil foundation and reinforcement concrete concrete components when compaction of concrete soil. The high frequency disturbance power of electric direct - connected vibrator is driven by motor
The eccentric block is formed by rotation, and the motor is powered by a 150Hz or 200Hz medium frequency power supply.
10, electric plane: used for planing wood or wood structural parts, installed on the bench can also be used as a small platform. The cutter shaft of the electric plane is driven by the rotating shaft of the motor through the belt.
11, marble machine: generally for stone cutting, you can choose dry or wet cutting, commonly used saw blades: thousands of data, wet data, dry and wet data. Home decoration is used for cutting wall tiles.
12. Cutting machine
Mainly used for cutting different angles of aluminum, wood, etc. When using, pay attention to tighten the saw blade and wear safety goggles.
13. Electrical innovation
Electric tool is a power tool with a rotating tool shaft, mainly used for planing wood and plastic surfaces. The tool can adjust the list of electrical tools
14. Grinder
Used for grinding wood. Need to install sandpaper.
15. Engraving machine
Used for trimming, drawing and carving wood
